flame test

英 [fleɪm test] 美 [fleɪm test]

点火试验(发动机的)

化学



双语例句

  1. Study on the Flame Heating Quench Strengthen Test of Tianium Alloy Plate
    钛合金板材火焰加热淬火强化试验研究
  2. Full scale flame spread test on bundled PVC cables
    成束PVC电缆全尺寸火蔓延实验研究
  3. The double hydrogen flame design can test the low-content hydrocarbon and high-content CO, CO2 separately, which avoid the mutual interference.
    双氢焰设计,使低含量的烃类和高含量的CO、CO2分别检测,避免相互干扰。
  4. This paper introduces the requirement of flame retardant protective clothing, study on the fire retardancy test methods in the world and its developing trend.
    介绍了阻燃防护服的性能要求、国内外阻燃防护服防火性能检测方法的研究及发展趋势。
  5. The conveyor belt has passed the flame test and static test pilot, and received certificate of coal safety signs and customer recognition.
    该输送带已通过阻燃测试及静电测试等试验,并获得了合格证煤安标志及客户认可。
  6. CONCLUSIONS The derivative flame atom absorption methord is a comparable high sensitive way to test the beneficial element in traditional Chinese medicine.
    结论:导数火焰原子吸收法是测定中药中微量有益元素的一种灵敏度较高的方法。
  7. Characterization and Flame Retardancy Test of Bis ( 4-Carboxyphenyl) Phenyl Phosphine Oxide
    双(4-羧苯基)苯基氧化膦表征及阻燃特性测试
  8. The flammability of leather was evaluated by the vertical flame test and Oxygen Index Test.
    革的燃烧性能用垂直燃烧试验和氧指数进行表征。
  9. The results of TGA and flame test showed the addition of nano-meter MMT improved thermal stability of the blend and increased the char yield, resulted in better flame retardance.
    热重分析和燃烧测试表明,nanoMMT的加入提高了材料的热稳定性,使剩炭率增加了12%,从而提高了材料的阻燃性能;
  10. The blend fabrics with different ratio of the two fibers were determined by the vertical flame test and their flame_retardant property was analyzed by limiting oxygen index ( LOI) method.
    将2种纤维按不同混纺比制成织物,通过垂直燃烧试验法和LOI法测试分析织物的阻燃性能。
  11. Through this analysis, it is concluded that this flame swing formed by this reason disappeares naturally in high-altitude simulation test and in ground test with truncated nozzle.
    通过分析得出,由此产生的火焰偏摆在高空模拟试验或用截短喷管的地面试验中会自然消失。
  12. Test results show that the oxyacetylene flame method is nearly as good as the rocket engine test. Thus the oxyacetylene flame test may be regarded as a simple and effective method for selecting rocket nozzle materials.
    试验表明,氧乙炔焰喷吹比较接近发动机试车的结果,它可作为筛选喷管材料的一种简易有效的方法。
  13. According to the ionization effect in organic flame and the recent test results, the author think that the ionization effect is a state parameter of combustion gas, and hence proposes that it be applied to the temperature measurement in combustion process.
    根据有机物火焰的电离效应和新近的试验结果,认为电离效应是燃烧气体的状态参数,并因此提出用电离效应测量燃烧过程的温度。
  14. It has been observed that the volume, shape and color of the flame changed significantly in the test condition mentioned in the paper.
    实验表明助燃剂温度及其含氧量对火焰特性有非常显著的影响,高温低氧条件下的火焰体积、火焰亮度与颜色、火焰形状等特性明显改变。
  15. Synthesis and Flame Retardant Test of Phosphorus Containing Nylon-66
    含磷尼龙66界面缩合及阻燃性能研究
  16. The paper will analyze many difficulties of incendiary agent flame temperature test, and a new method of using photoelectric colorimeter will be given to the temperature test, and solve the problem of rate of flame launch ( E).
    本文分析了燃烧剂火焰温度测试的诸多难点,提出用光电比色计测试火焰温度的方法,并解决了火焰辐射系数ε不易确定问题。
  17. Based on the optimum analysis on the technique parameters of oxyacetylene flame spraying and orthogonal test, this paper obtains a coating with satisfactory deposition efficiency, which provides a basis for the correct usage of the technology.
    对氧乙炔火焰喷涂的工艺参数经试验优选分析,采用正交试验法得出沉积率较理想的涂层,为正确使用该项工艺提供依据。
  18. The "soluble" lead content in paints is determined by use of flame atomic absorption spectrometric method. The factors that affect the test results, in terms of acidity of chlorhydric acid solution for extraction, the extraction time and particles size of paint are studied.
    用火焰原子吸收法测定涂料中可溶性铅含量,改变萃取用盐酸的酸度、萃取时间以及所测涂料颗粒的大小,考察影响测试结果的因素。
  19. Chinese Corner Surface Flame Spread of Blockboard Lining in a Room Corner Fire Test
    全尺寸墙角火实验中木工板表面火蔓延研究
  20. Exploration of the flame test method of IEC 60332-3, Category A for bunched cables
    IEC60332-3中A类成束燃烧试验方法的探讨
  21. There mainly analyzed the test that required by GB as temperature resistance, the test of flame under oxide pressure, the test of leakage safety machine, the test of rubber materials and the test of metal materials.
    重点对国家标准要求的耐温性试验、氧气压力激燃试验、安全泄放装置试验、橡胶材料试验及金属材料试验等项目进行了分析和讨论。
  22. P test, sodium flame test, oil mist test and particle counting test, are introduced briefly. Furthermore the numerical relations of the above four methods are analyzed.
    P法、钠焰法、油雾法和粒子计数法,分析了以上4种方法的数值关系。
  23. Chemical Analysis of Flame Retardant and Performance Test of Flame Resistant Fabric ( II)
    阻燃剂化学分析和阻燃织物性能测试(二)
  24. Experimental study of combustion temperature of stirling engine The visualized test bench is established. High speed camera technology was applied to study ignition, flame structure. Double-color CCD method was applied to test temperature field.
    斯特林发动机的燃烧可视化实验研究应用高速摄像机研究斯特林发动机着火情况,火焰结构;应用双色CCD法对模拟燃烧室温度场进行研究。
  25. Will flame retardant cotton to test performance of extreme oxygen index, chroma, breaking strength, water processing times and anti-angiogenesis.
    将阻燃棉进行极限氧指数、色度、断裂强度、水洗次数以及抗折皱性等方面的性能测试。
  26. The main work and conclusions are as follows ( 1) The experimental apparatus for flammable gases explosion and deflagration suppression in pipe were set up, realizing computer controlled ignition and synchronized measuring of the pressure and flame speed of the test points.
    本文主要工作和结论如下(1)建立了管内可燃气体爆炸与爆炸抑制试验装置,实现了计算机程控点火和同步采集测点的压力和火焰速度。
  27. It can obtain the accurate time series of pulse flame temperature.3.Making the chaos test on pulse combustion time series of flame temperature by the largest Lyapunov exponent method, and using improved algorithm of the small amount of data method to c implement chaos detection.
    运用最大Lyapunov指数法对脉动燃烧火焰温度时间序列的进行了混沌检测,并采用小数据量改进算法来具体实现检测。
  28. The optimal amount and treatment conditions of flame retardant were obtained after the test and analysis of fire retardancy performance and mechanical performance of materials dealed with different amount and conditions and treatment conditions of flame retardant.
    对用不同用量阻燃剂和处理条件阻燃处理后材料的阻燃性能、力学性能等进行了测试和分析,得到了较理想的结果。